TypePy

SCPI Commands :

CONFigure:GPRF:MEASurement<Instance>:POWer:PSET:FILTer:TYPE
CONFigure:GPRF:MEASurement<Instance>:POWer:PSET:FILTer:TYPE:ALL

class TypePyCls

TypePy commands group definition. 2 total commands, 0 Subgroups, 2 group commands

get(index: int) → DigitalFilterType

# SCPI: CONFigure:GPRF:MEASurement<Instance>:POWer:PSET:FILTer:TYPE
value: enums.DigitalFilterType = driver.configure.power.parameterSetList.filterPy.typePy.get(index = 1)

Selects the IF filter type for the parameter set <Index>.

param index:

integer Range: 0 to 31

return:

filter_py: BANDpass | GAUSs | WCDMa | CDMA | TDSCdma BANDpass: bandpass filter GAUSs: Gaussian filter WCDMA: 3.84-MHz RRC filter for WCDMA TX tests CDMA: 1.2288-MHz channel filter for CDMA 2000 TX tests TDSCdma: 1.28-MHz RRC filter for TD-SCDMA TX tests

get_all() → List[DigitalFilterType]

# SCPI: CONFigure:GPRF:MEASurement<Instance>:POWer:PSET:FILTer:TYPE:ALL
value: List[enums.DigitalFilterType] = driver.configure.power.parameterSetList.filterPy.typePy.get_all()

Selects the IF filter type for all parameter sets.

return:

filter_py: BANDpass | GAUSs | WCDMa | CDMA | TDSCdma Comma-separated list of 32 values, for parameter set 0 to 31 BANDpass: bandpass filter GAUSs: Gaussian filter WCDMA: 3.84-MHz RRC filter for WCDMA TX tests CDMA: 1.2288-MHz channel filter for CDMA 2000 TX tests TDSCdma: 1.28-MHz RRC filter for TD-SCDMA TX tests

set(index: int, filter_py: DigitalFilterType) → None

# SCPI: CONFigure:GPRF:MEASurement<Instance>:POWer:PSET:FILTer:TYPE
driver.configure.power.parameterSetList.filterPy.typePy.set(index = 1, filter_py = enums.DigitalFilterType.BANDpass)

Selects the IF filter type for the parameter set <Index>.

param index:

integer Range: 0 to 31

param filter_py:

BANDpass | GAUSs | WCDMa | CDMA | TDSCdma BANDpass: bandpass filter GAUSs: Gaussian filter WCDMA: 3.84-MHz RRC filter for WCDMA TX tests CDMA: 1.2288-MHz channel filter for CDMA 2000 TX tests TDSCdma: 1.28-MHz RRC filter for TD-SCDMA TX tests

set_all(filter_py: List[DigitalFilterType]) → None

# SCPI: CONFigure:GPRF:MEASurement<Instance>:POWer:PSET:FILTer:TYPE:ALL
driver.configure.power.parameterSetList.filterPy.typePy.set_all(filter_py = [DigitalFilterType.BANDpass, DigitalFilterType.WCDMa])

Selects the IF filter type for all parameter sets.

param filter_py:

BANDpass | GAUSs | WCDMa | CDMA | TDSCdma Comma-separated list of 32 values, for parameter set 0 to 31 BANDpass: bandpass filter GAUSs: Gaussian filter WCDMA: 3.84-MHz RRC filter for WCDMA TX tests CDMA: 1.2288-MHz channel filter for CDMA 2000 TX tests TDSCdma: 1.28-MHz RRC filter for TD-SCDMA TX tests