from .....Internal.Core import Core
from .....Internal.CommandsGroup import CommandsGroup
from .....Internal import Conversions
# noinspection PyPep8Naming,PyAttributeOutsideInit,SpellCheckingInspection
[docs]
class RbwCls:
"""Rbw commands group definition. 2 total commands, 0 Subgroups, 2 group commands"""
def __init__(self, core: Core, parent):
self._core = core
self._cmd_group = CommandsGroup("rbw", core, parent)
[docs]
def get_auto(self) -> bool:
"""SCPI: CONFigure:GPRF:MEASurement<Instance>:SPECtrum:FSWeep:RBW:AUTO \n
Snippet: value: bool = driver.configure.spectrum.freqSweep.rbw.get_auto() \n
Enables or disables the automatic mode for the RBW in frequency sweep mode. \n
:return: rbw_auto: OFF | ON
"""
response = self._core.io.query_str('CONFigure:GPRF:MEASurement<Instance>:SPECtrum:FSWeep:RBW:AUTO?')
return Conversions.str_to_bool(response)
[docs]
def set_auto(self, rbw_auto: bool) -> None:
"""SCPI: CONFigure:GPRF:MEASurement<Instance>:SPECtrum:FSWeep:RBW:AUTO \n
Snippet: driver.configure.spectrum.freqSweep.rbw.set_auto(rbw_auto = False) \n
Enables or disables the automatic mode for the RBW in frequency sweep mode. \n
:param rbw_auto: OFF | ON
"""
param = Conversions.bool_to_str(rbw_auto)
self._core.io.write(f'CONFigure:GPRF:MEASurement<Instance>:SPECtrum:FSWeep:RBW:AUTO {param}')
[docs]
def get_value(self) -> float:
"""SCPI: CONFigure:GPRF:MEASurement<Instance>:SPECtrum:FSWeep:RBW \n
Snippet: value: float = driver.configure.spectrum.freqSweep.rbw.get_value() \n
Configures the resolution bandwidth (RBW) for the frequency sweep mode. Setting this value is only possible if the
automatic mode is off. \n
:return: rbw: numeric Only certain values can be configured, see Table 'Supported values'. Other values are rounded to the next allowed value. Range: 100 Hz to 10 MHz, Unit: Hz
"""
response = self._core.io.query_str('CONFigure:GPRF:MEASurement<Instance>:SPECtrum:FSWeep:RBW?')
return Conversions.str_to_float(response)
[docs]
def set_value(self, rbw: float) -> None:
"""SCPI: CONFigure:GPRF:MEASurement<Instance>:SPECtrum:FSWeep:RBW \n
Snippet: driver.configure.spectrum.freqSweep.rbw.set_value(rbw = 1.0) \n
Configures the resolution bandwidth (RBW) for the frequency sweep mode. Setting this value is only possible if the
automatic mode is off. \n
:param rbw: numeric Only certain values can be configured, see Table 'Supported values'. Other values are rounded to the next allowed value. Range: 100 Hz to 10 MHz, Unit: Hz
"""
param = Conversions.decimal_value_to_str(rbw)
self._core.io.write(f'CONFigure:GPRF:MEASurement<Instance>:SPECtrum:FSWeep:RBW {param}')